Active Fluid Cooler
|Active Fluid Cooler|
Fission Cooling[edit | edit source]
The Active Fluid Cooler is placed inside a Fission Reactor reaction chamber and provides cooling.
Unlike regular coolers which are crafted with other ingredients, the Active Fluid Cooler is filled with fluid coolant during operation. Over time the coolant will be consumed and needs to be refilled. Compatible fluids are Water, Gelid Cryotheum, Destabilized Redstone, Resonant Ender, Energized Glowstone and Liquid Helium.
Coolant must be pumped into a Buffer from the outside, and pumped from the Buffer to the Active Fluid Cooler on the inside. The active cooler will use a maximum of 0.25 mB/t (0.5 mB/t in the upcoming v2.8) while the reactor is running. Further information may be found in the article on Fission Reactor.
Cooling rate: variable
Conditions: Must meet the same criteria as the matching type of cooler.
Fusion Cooling[edit | edit source]
Note: Active cooling will be removed after the reactor overhaul. The processes and values described below are accurate and effective as of NuclearCraft v2.16f.
Fusion Reactors may only be cooled by Active Fluid Coolers. The number of coolers required by a Fusion Reactor depends on the size of the reactor and the choice of Fuels (and any changes made for the modpack being playing). Each fuel combination has a temperature at which the fusion process is most efficient. This temperate may be determined by multiplying the Heat Variable from the fuel table, by 1.21876. For example, the ideal temperature for a Hydrogen/Hydrogen is approximately 2600MK.
Active Fluid Coolers must be placed adjacent to two Fusion Electromagnets. Best performance can be achieved by placing pairs of Active Fluid Coolers on opposite sides of the entire fusion ring.
Active Fluid Coolers must be supplied with a fluid coolant. There are several different coolants; each with its own cooling rate as detailed below. Normally-solid materials such as Diamond and Lapis can be liquefied by processing them in a Melter. The following table lists the available coolants and their effectiveness:
(Values taken from Enigmatica 2 v 1.53 - Nuclearcraft 2.12f)
When correctly placed and supplied with coolant, the Fusion Reactor GUI will display the cooling effects as illustrated in the sidebar. A cooling rate of 100% (stable, no change in temperature) can be achieved with different combinations of coolers. In the reactor used for testing while writing this document, stability was achieved with a single Active Fluid Cooler supplied with Molten Iron and a pair of Active Fluid Coolers supplied with Water.
Recipe[edit | edit source]