Feed The Beast Wiki

Follow the Feed The Beast Wiki on Discord or Mastodon!

READ MORE

Feed The Beast Wiki
Register
Advertisement

Введение

GregTech 6 (GT6) это переписанный мод. Он не является просто аддоном, дополняющим другие моды или инструменты. Этот мод содержит своё собственное древо технологий, собственную ветку развития, собственный баланс, и машины на все случаи жизни. Высокая сложность в GT6 подталкивает к более продуманному развитию.

Например, вот вещи, которые всегда следует держать в уме:

  • Вы не можете создать уголь из дерева, как раньше, потому что в GT6 для этого требуется построить Коксовую печь.
  • Ванильные инструменты сильно ослаблены, потому что GT6 добавляет свои варианты инструментов со своими особенностями.
  • Вы можете смешать медный и оловянный порошок, чтобы получить бронзу (в специальном миксере GT6), но большинство сплавов так не работают; вы не сможете просто скомбинировать слитки. Это не эффективно, потому что вы получите меньше бронзы. Для эффективного сплава бронзы существует подходящий инструмент - плавильный тигель.

Так что, если вы окажетесь в технологическом тупике, помните, что в GT6 может быть более простое решение. В GregTech вы будете развиваться медленно, но это будет увлекательно.

Общие замечания

NEI - это лучший друг GT. Он показывает рецепты и всплывающие подсказки, содержащие очень важную информацию. Однако, в NEI содержится много похожих вариантов крафта, потому что в GregTech полно 'перерабатывающих' рецептов (которые просто меняют форму ресурса, или разбирают машину на металлы, из которых она состоит). По этой причине многие рецепты не действительны, так как на их большую часть материалов в игровом мире может не быть. Одна из наиболее важных категорий рецептов в NEI - "Комбинированная плавка (Combination smelting)". Вы можете найти эту категорию, когда будете искать рецепт слитка (к примеру бронзы). В моде в процессе игры так же будет попадаться GT-книга плавки, но по сравнению с NEI она неудобна, потому что в ней нет поиска. Нажимайте на R/Left-click и U/Right-click на предметах в таблице рецептов, чтобы быстро переключаться между рецептами и назначением материалов.

Руды в GregTech генерируются в виде разных форм, однако, наиболее удобными являются малая руда (Small), песок (Sand) и гравий (Gravel). Малые руды имеют низкий уровень добычи, чем их обычные варианты. Если разбить малую руду, то выпадет измельчённая руда (а может быть и драгоценный камень). Песок и гравий лучше копать лопатой, а не киркой. Однако, можно применить хитрость и подставить факел под песок и гравий, и они будут разрушаться автоматически при падении. Так же есть шанс, что руда будет на поверхности пустынного биома. По этой причине пустынные биомы могут быть отличным местом для старта игры.

Нажав одновременно клавиши «F3» и ​​«H» можно открыть расширенный дисплей отладки. Этот дисплей позволяет просматривать температуры плавления (M: melting) и кипения (B: boiling) всех предметов, которые могут быть брошены в плавильный тигель, вместе с их составляющими.

Железо (Iron) в GregTech будет недоступно на ранних этапах, поэтому вместо железных вёдер можно использовать деревянные вёдра для переноски холодных жидкостей (вода, молоко). Лаву и другие горящие жидкости в них перенести не получится. Из деревянных вёдер нельзя пить, поэтому для питья придётся использовать другие ёмкости.

У Скелетов (Skeletons) есть шанс (1 к 16) выстрелить любой стрелой GregTech вместо обычной стрелы, поэтому он может стрельнуть радиоактивной стрелой и игрок будет получать радиоактивный урон. Хорошей идеей будет носить с собой молоко, ведь оно нейтрализует радиацию (но не в ведре, а в другой ёмкости, ведь из ведра нельзя пить).

На начальных этапах игры старайтесь обыскивать пещеры и сундуки в шахтах и в поселениях. Найденная металлическая броня может быть переплавлена в Плавильном тигеле. Для защиты можно использовать кожаную броню. Помните, что в тигеле могут плавиться только неиспользованные предметы. Использованные инструменты и оружие не будут плавиться, но доспехи можно расплавить даже если они повреждены. Так же GregTech предоставляет свой собственный тип структур - Крепости, представляющие из себя большое помещение с несколькими комнатами и большим количеством лута (можно найти сталь, ранние машины вроде тигеля, нефть, порталы и т.д.). Исследование мира в GregTech - очень полезное занятие!

Фосфорный порошок (Phosphorus Dust), Серный порошок (Sulfur Dust), Сухая трава (Dry Grass) и Креозотовое масло могут быть использованы для крафта факелов или спичек.

Последнее замечание: Творческий режим - это ваш лучший друг. Экспериментируйте. Типы энергии, паровые трубы, рецепты в тигеле. По началу всё это может показаться слишком сложным для понимания мода. Держите всегда творческий режим под рукой и тестируйте. И ещё... Это руководство может быстро устареть, потому что GT обновляется каждую неделю, поэтому не принимайте всё описанное здесь слишком дословно.

Каменный век

Первым делом, когда начнёте новую игру с GT6, Вам потребуется найти место для базы. Для этого обратите внимание на следующие пункты:

  • Руды GT генерируются большими скоплениями, или одиночными блоками. Пустыня - благоприятное место для создания базы. Есть шанс, что вы сможете найти Песчаный лигнит/Песчаный уголь (Sand Lignite/Sand Coal), которые являются хорошим топливом. Так же здесь может попасться Jasper. Из него можно будет сделать огниво (Flint and tinder), которое вскоре сильно пригодится. Некоторые руды имеют очень высокий Y-уровень спавна. Одни из них - Медь (Copper) и Олово (Tin). По этому будет отличной идеей поселиться около высоких гор.
  • Деревни - тоже отличное место на начальных этапах игры, потому что в них есть Сундуки. В них могут содержаться драгоценные материалы, которые Вы ещё не скоро сможете сделать самостоятельно. Бонус деревни - развитое сельское хозяйство и возможность торговать с жителями.
  • Густые леса Тёмного дуба или Еловой тайги - лучшая находка для применения топоров GT (прямые столбы деревьев и почти нет веток) И пока вы не найдёте уголь - это место будет отличным источником топлива. Имейте ввиду, что саженцы Ели, как Тёмного дуа и Дерева джунглей, можно разместить формацией 2x2. В результате получится очень большая Ель, что идеально для топоров GT.
  • Вода по умолчанию не бесконечная, поэтому Вам потребуется Река, или Океан, чтобы разместить Водозабор (Drain Cover), необходимый для водоснабжения Вашей промышленности по достижении Парового века.

Поскольку Вы начинаете в Каменном веке, Вам придётся вести себя, как пещерный человек. Целевыми инструментами для Вас будут инструменты из кремния (Flint). В GT6 кремний (flint) имеет свойство огня, что очень удобно, потому что позволяет поджечь врага, или запечь мясо при убийстве животного. Кремниевые инструменты имеют не большую прочность, но их можно легко найти, копая гравий (в деревнях есть тропинки из гравия).

Кремниевые инструменты крафтятся из Кремния и одой Палки(Stick).

Вам будут попадаться палки и камешки, лежащие на земле. Они Вам очень пригодятся. Какие-то камешки окажутся кремнием, какие-то будут содержать руду и обозначать скопление такой же руды на неопределённой глубине, а другие - местным видом каменной породы. Очень низкий шанс, что среди камешков окажутся метеоритные осколки (Meteorites), которые отлично подходят для создания Огнива.

Кирка из булыжника имеет очень низкую прочность (около десяти блоков камня), но зато она очень быстро разбивает камень. Инструменты из булыжника оставлены в GT6 для совместимости с другими модами. Чтобы включить рецепты GT, вы должны изучить скрипты Minetweaker. Каменные инструменты GT также могут быть сделаны из камешков(Rocks), которые лежат на земле, или в пещерах.

Так же сосредоточьтесь на сельском хозяйстве. Позже Вы сможете автоматизировать производство пищи, потому что ресурсы сельского хозяйства возобновляемые.

Очень полезно сделать GT-Меч, GT-нож или топор, так как Вам потребуются источники розжига для крафта ванильной печи, а потом и горелки (Burning Box). Источники розжига - это Спички (Match), Зажигалка (Lighter), Огниво (Flint and Tinder), или поджигатель (Fire Starter). Используйте меч или нож, чтобы нарубить травы для крафта поджигателя. Траву придётся сложить в сноп(Grass Bale), сноп высушить, разместив его в сухом месте, а потом разобрать высушенный сноп обратно. Другой вариант - сделать поджигатель из сухой коры, которую можно добыть при помощи топора, кликая по мёртвому бревну (Dead Log) ПКМ. Таким же способом можно снять кору с обычного дерева. Дерево без коры даёт больше досок.

В GT6 в ванильной печи могут быть расплавлены только те металлы, у которых низкий порог плавки. К ним относятся Медь(Copper), Олово(Tin), Бронза(Bronze), Свинец(Lead), Цинк(Zinc) и Висмут(Bismuth). Все остальные металлы могут быть переплавлены (и смешаны) в Плавильном тигеле, нагретом Горелкой и отлиты в Формы


Создание первого тигеля и понимание правильной плавки имеет наиважнейшее значение в GT6.

Плавка

Плавка в тигеле не имеет пользовательского интерфейса.

Тигель - это блок, который необходимо разместить наверху Горелки и выбросить в него ингредиенты. Если поджечь топливо в горелке, то она будет передавать тепло в тигель и поднимать температуру, необходимую для плавки (а может расплавить и тигель). К такому взаимодействию лучше привыкнуть, потому что большинство машин в GT не имеют графического интерфейса. Вам придётся выполнять работу вручную, и только позже появится возможность постепенно всё автоматизировать.

Для начала Вам понадобится много Глины(Clay), несколько камней(Stone), Кремний(Flint) и уголь(Coal), Медь(Copper) и Олово(Tin), чтобы сделать Медные и Оловянные слитки, и 8 слитков Свинца(Lead) или Висмута(Bismuth) (Висмут довольно трудно найти, поэтому, скорее всего, это будет Свинец).

Объедините палку и 6 камешков (или кремния), чтобы сделать Дубину(Club), затем разломайте булыжник дубиной, чтобы получить ещё больше камешков, из которых можно создать больше дубин, или Молотков (понадобится много Молотков из камня, так как их прочность(durability) очень низкая). Вам понадобятся четыре слитка, чтобы сделать две пластины. Возьмите слитки в руку и нажмите ПКМ на наковальне. В результате все слитки, которые были в руке, будут размещены на одной стороне наковальни. Нажмите пустой рукой ПКМ по свободной поверхности наковальни, чтобы слитки распределились равномерно. Возьмите молот и нажмите ПКМ по наковальне. В результате получится двойной слиток (Double Ingot). Возьмите двойные слитки, разместите так же на одной стороне наковальни и ударьте по ним молотом. Пластины (Plate) готовы. Скомбинируйте палку и две пластины, чтобы получить Напильник (File). Слиток + напильник = палка (Rod). Совместите пластину (Plate), металлическую палку(Rod) и Молоток (Hammer), чтобы получить Chisel Head, затем скомбинируйте chisel head и палку и получите Зубило (Chisel).

Когда Вы создатите Плавильню, то сможете наиболее эффективно плавить бронзу. А пока, для того, чтобы получить бронзу, Вам придётся смешивать Медную пыль(Copper Dust) и Оловянную пыль(Tin Dust) в Смешивателе(Mixing Bowl) в соотношении 3 к 1.

Сложите шесть медных или свинцовых пластин на верстаке в Y-форму и по центру разместите молот. Вы получите Ключ. Теперь у нас есть всё необходимое, чтобы построить Плавильный тигель.

"Примечание:" Настоятельно рекомендуется создать Клещи. Отлитые и застывшые предметы в формах(Mold) будут охлаждаться очень медленно (100 Кельвинов в секунду), и могут нанести урон, если попытаться изъять их голыми руками. Взяв в руки Клещи, и нажав ПКМ по застывшему предмету, игрок не получит никакого урона.

Обожгите в печи 12 кусков глины, чтобы сделать из них кирпичи. Оставшиеся куски глины сложите в глиняные блоки и тоже обожгите в печи, чтобы получить обожжёную глину. На верстаке объедините 7 кусков обожжёной глины, Молоток и Зубило, чтобы сделать Керамический тигель. Сложите двойную медную пластину (делается из двух одинарных пластин, разложенных на наковальне), три кирпичных блока, четыре свинцовых (висмутовых или бронзовых) пластины и ключ, чтобы получить горелку (Burning box)(Особой разницы в горелках нет. Они лишь немного отличаются скоростью/эффективностью). И, наконец, чтобы получить Форму, Вам потребуется пять блоков обожжёной глины, зубило и молоток.

Самый эффективный и доступный тигель лучше делать из керамики, потому что он имеет высокую термоустойчивость, что позволяет переплавлять большинство металлов и сплавов. Но соблюдайте осторожность, потому что он очень быстро нагревается и охлаждается. Стандартные формы тоже лучше делать из керамики, потому что они тоже термостойкие и глину, необходимую для их создания, очень легко найти в реке, или в болоте.

Разместите тигель подальше от воспламеняющихся предметов. Поставьте горелку прям под тигелем и убедитесь, что перед лицевой частью горелки не стоит никаких блоков. Установите несколько форм вплотную к тигелю.

"Примечание:" Изначально формы для плавки не имеют никакого шаблона. Форма предмета, который будет отливаться в форму, зависит от шаблона, который следует выдолбить Зубилом. Формы тоже не имеют GUI. Поверхность формы состоит из 25 ячеек, из которых следует выбить шаблон для плавки, чтобы получить необходимый предмет. Если шаблон оказался не правильным, то вместо предмета получатся осколки (Nuggets). На странице формы отображены все валидные шаблоны, а так же шаблоны описаны в книгах, которые будут находиться в подземельях, или выпадать из зомби-жителей. Чтобы выбить шаблон, возьмите зубило(Chisel) и кликните по поверхности формы(Mold) ПКМ. Так же имейте ввиду, что если Вы захотите снять форму киркой, расположенную около тигеля, делайте это с осторожностью. Форма может попасть в тигель и превратиться в керамический мусор (Ceramic Scrap). После этого она станет бесполезной. Лучше всего снимать её при помощи Construction Pick или Гаечного ключа (Wrench), потому что они имеют авто-захват.

"Примечание:" NEI показывает, что в тигель следует бросать только чистые металлы. На самом деле в тигель можно бросать металл любой формы. Чанки, грязную пыль, дроблёную руду, неповреждённые металлические инструменты и доспехи. Всё, кроме блоков руды. Если бросать не очищенные металлы, то в тигеле будет появляться камень, или дерево, которые следует удалить. Материал, брошенный в тигель, можно извлечь ПКМ в виде лома (Scrap), пока тигель холодный. Если попытаться достать материал из нагретого тигеля, то персонаж получит значительный урон, что, скорее всего, убьёт его. По состоянию на 6.07.05, можно использовать лопату, чтобы извлекать лом из нагретого тигеля. Но лучше этого не делать, ведь температура плавления лопаты может оказаться ниже температуры тигеля.

Тигель нагревается горелкой, находящейся под ним. Материал, из которого изготовлена горелка (Burning box), определяет скорость горения топлива и его теплоэффективность. Чтобы использовать горелку - её следует разжечь. В GregTech Поджигатель из кремния и трута - это эквивалент {{L|Flint and Steel|}Поджигателю из кремния и стали}, но создаётся из кремния и осколка, камня, или самоцвета разных материалов - железа, никеля, джаспера, кварца, золота и других типов ископаемых. Так же существует способ разжечь огонь при помощи разжигателя (Fire Starter). Возьмите топливо и при помощи ПКМ поместите в горелку. Подойдёт любой вид топлива (уголь, древесный уголь, саженцы и т.д.)("Примечание:" Вы не сможете извлечь топливо обратно, пока горелка работает). Когда в горелке будет топливо - кликните ПКМ по горелке, держа в руке поджигатель. Возможно, получится не сразу, потому что шанс на успех разведения огня равен лишь 30%.

Когда горелка работает - она производит золу или тёмную золу; нажмите ПКМ пустой рукой по горелке, чтобы извлечь их (раньше это можно было сделать и во время рабочей горелки, но сейчас лучше извлекать золу при помощи лопаты, иначе можно обжечься). Горелка будет работать до тех пор, пока не закончится топливо, либо перед ней не поставить какой-нибудь блок. Поэтому размещение (например) блока грязи перед горелкой позволяет выполнить её незапланированное отключение.

Важные меры техники безопасности:

  • Включенная горелка вызовет возгорание близлежащих воспламеняющихся объектов (на расстоянии 4 блоков вокруг)
  • Нельзя прикасаться (ПКМ или телом персонажа) к разогретому тигелю или форме для выплавки, а так же собирать только что отлитый металл, потому что можно получить очень сильные (смертельные) повреждения.
  • Если предмет или материал внутри тигеля достигает точки кипения (BP), или если точка кипения материала не указана, то он испарится, нанося тяжёлое повреждение всем, кто находится рядом. Это правило относится к формам и тигелю непосредственно. "Примечание: " когда материал испаряется, масса в тигеле уменьшается, после чего он нагревается ещё быстрее. Если тигель испаряется, он так же уничтожает все материалы, находящиеся в нём, и оставляет очаги огня на некоторых блоках, расположенных вблизи.
  • Будьте предельно внимательны, размещая блоки перед горелкой в попытке отключить её. Она отключится не сразу, а только после того, как текущая единица топлива догорит до конца. Поэтому первое время в качестве топлива лучше использовать Лигнит или даже саженцы, потому что они сгорают быстрее и горелка быстрее отключится, когда Вы разместите блок перед ней (Лигнит и саженцы - это очень неэффективный вид топлива, по сравнению с углём и древесным углом. Можно так же использовать крошечные куски угольной пыли или дроблёный уголь). Например, если положить блок угля в горелку, поджечь его и сразу поставить перед горелкой блок земли, то горелка не выключится до тех пор, пока не догорит блок до конца. А это может привести к перегреву тигеля и испарению его содержимого.
  • Удаление горелки при помощи гаечного ключа немедленно выключит её и вернет золу и несгоревшее топливо, но топливо, которое уже горит, вернуть не получится. Это может быть более безопасной экстренной мерой, но будьте осторожны с тигелем. Он всё ещё нагрет. И этот способ отнимет запас прочности Вашего гаечного ключа.

Когда горящая горелка находится под тигелем - она начинает нагревать его. Скорость нагревания тигеля зависит от его массы и массы металла в нём.Когда металл расплавится, его можно отливать в Формы, размещённые рядом с тигелем нажатием ПКМ по форме. "Примечание:" Металл, отлитый в форму, имеет наивысшую температуру плавления. Например, если Ваш тигель рассчитан на 1360K и содержит 3 единицы бронзы и 1 единицу меди, бронза отольётся первой и только после 3 единиц бронзы будет отливаться медь.

This is an interesting mechanic when you're not following the recipes exactly (like if you have melted a lot of Tetrahedrite into Copper, mixed it with Tin to make Bronze, and retrieved the excess Copper after casting the Bronze)

Some notes on Materials

You can smelt meat into Cooked Meat Bars (ingots), which can then be used to make very nourishing Hamburgers.

When in need, Chalcopyrite smelts as Copper, Cassiterite as Tin and Galena as Lead, and can all be smelted in a regular Furnace.

The notable approximate temperatures for early metalworking are:

  • Tin (550K)
  • Lead (650K)
  • Copper and Bronze (1350K)
  • Iron (1800K)
  • Wrought Iron (2000K)
  • Steel (2050k)
  • Titanium (1941K)
  • Gold (1500K)
  • Stone (boils at 2000K)
  • Ceramic (Crucible vaporizes at 2500K).

By knowing these melting and boiling points, Crucible temperature can be roughly observed by looking at the color of the liquified metal in the Crucible until you craft a Thermometer. For instance if you mix Copper and Tin in a Crucible and heat it, you'll first see the liquid Tin (past 500K) and at some point later you'll see the Bronze (1350K). After you've poured the Bronze out of the Crucible, if there isn't any Bronze left, but there's still Copper, you'll see it liquefied (Bronze is a desaturated orange while Copper is a bright orange-red color). If there isn't Bronze nor Copper anymore, but there is Tin left, you'll see it liquefied (Tin is bright gray).

When the Crucible cool down too much, and goes below the melting point of a material everything goes back to the darkish solid state.

Note : If you've mixed different materials in the crucible, and if these materials do not all mix (like if you've thrown an Iron pickaxe, its Wood won't melt with its Iron regardless of the temperature), you'll never see the colored liquid state, whatever temperature the Crucible is, you'll only see the dark gray solid state. That's why you've have to respect recipes as much as possible until you can craft a thermometer.

Iron smelting is a bit of a special issue to handle. The primary source of Iron is Black Sand (aka Magnetite) (later on you'll encounter Yellow and Brown Limonite which are much more efficient to get iron from). Magnetite can be melted, but will not directly melt into Iron. In order to convert Magnetite into Iron, Coal or Charcoal must be mixed with the Magnetite(in previous versions of the mod, Dark Ashes was needed. This can be annoying because this is not listed in NEI). It does not matter what form the coal is in (dust, crushed, ingot etc...) it will all work. Pyrite and legitimate Iron Ore are even better for getting iron ingots, but they're way harder to find. Hematite is easier to find but is a bit of a pain, because you have to smelt it with Coal AND Calcite (gotten from smelt marble or limestone).

Steel is made by combining iron and air in a crucible, requiring temperatures of at least 2046K. You can add air to a crucible by putting a steam engine right up to the crucible. The air will not be added to the crucible if it is full, so watch how much iron you add to the crucible. You will know when your iron has turned into steel when the liquid color goes from dark orange to blood red.

Hammers help you crush ores into crushed dusts (especially Copper and Tin that are found on a regular basis in caves), you'll get more material from an ore that way, especially if you wash them afterwards in a Cauldron.

One final note, but I'll write that again in another topic: Rubber can be smelted in the Crucible. Rubber plates are in fact Rubber sheets. Following the same principle you can also make Rubber rings with liquid Rubber. Be careful because you waste a part of the material in the process though. It's one of the "hidden recipes" that does not appear in NEI because the Crucible and Molds are GUI-less, so feel free to experiment on your own.

Before the Forge Age your current work process should more or less be:

  • Mining Ore (like Copper) or getting crushed ore directly from sparse Sand/Gravel Ores.
  • Crushing Ore to Crushed Ores with hammers.

The next Age is more rewarding.

The Forge Age

Before diving in the wonderful world of machines and automation characterizing the Forge Age, you'll need some very convenient tools and contraptions.

  • A Mortar. Made of 2 Iron ingots and 5 Hardened Clay, very useful for turning a lot of things in the dusts: crushed ores, ingots, coal, scraps and so on. Be wary, dusting a lot at once will make you hungry very fast! Better have some food with you.
  • An Iron Bucket. Made of 3 iron plates, 2 of them curved by hammering a plate on a rolling cylinder, it's your only way to carry Lava. Why would you want to have Lava ? Because Lava poured in a Crucible allows you to make Obsidian tools. Although their durability is not that great, since Lava can be found quite easily (especially if you open an early Nether Portal) and since Obsidian is a Tier 3, Fire Aspect material, Obsidian tools are the perfect upgrade after Flint ones: plentiful, efficient, and easy to make. Because Lava is hot, pouring a bucket of it in a Crucible will heat it immediately, but not enough for maintaining liquid state, so you still need a burning box (be careful, obsidian has a very low density). Tools retrieved from molds are "raw" and need to be sharpened to be of any use so finish them with a file, or better, a Sharpener. Of course you can use your Tools Molds with other materials, like Bronze.
  • A Thermometer or Thermometer Sensor. It's really easy to overheat the crucible without it. First you'll need a Thermometer. You will need Mercury, which you get by melting Cinnabar from a Redstone vein (found at heights 10-40 in yellow Komatiite), since it has a very low melting point, you can melt it in the furnace, and then drop an ingot in the cold Crucible. After you melt it down, you can take it directly out of the crucible with a glass bottle to use in the recipe. You can use this now by right clicking on blocks that can overheat like the crucible to see its temperature, or you can turn it into a Thermometer Sensor to place directly on the crucible which will constantly say the temperature and have the ability to output a redstone signal at certain temperatures. You'll need two Red Alloy Ingots (1 Copper + 4 Redstone = 1 Red Alloy ingot). You'll also need some glass, and Tin Alloy which is made from Tin and Wrought Iron. A Thermometer Sensor is placed on the front of the Crucible. You'll need a wire cutter, a rolling cylinder and a hammer to turn red alloy plates into Red Alloy Wire. It's a time effort to craft your first thermometer, but it's really worth it: you'll make tremendous progress in understanding the smelting process and in managing your Crucible safely.
  • A Cauldron is made of 7 Iron plates (or Wrought Iron plates so you can use them there if needed). The Cauldron is, with the Sifter and the Hammer, the next step in your ore mining process: throw in crushed ores to clean them and get by-products. It's especially worth it to clean crushed ore because otherwise it'll bring a bunch of stone with it into the cauldron. You want to try to smelt washed "purified" or refined ores as much as possible. If you see the witch hut, don't forget to steal one.
  • A Sifting Table costs 8 units of iron, but it's your only way to manually process Sand and Gravel Ores, which are in huge veins (especially in Atum, if you include there), so it's well worth it to craft it as soon as possible. It's also the only way to get gems from gem ores. Right click Ore onto the top spot to place it there, then hold down right-click to sift the Ore, then, after it has passed through the Sifter, right click the bottom result to pull out the purified Ore and extracts. Crushed, purified gem or crystal ores can be sifted to get gems (this includes Lapis and Coal). Gravel can be sifted to get Flint, Quartzite and trace Clay. Dirt can be sifted to get pumpkin, wheat and melon seeds. I recommend to use Hopper under the Sifter to automatically withdraw products.
  • A Sharpener costs as much as a Sifter, but the investment will pay off big time because sharpening your raw tools is almost a daily occupation in GregTech since you'll mine a lot and cut down tons of wood for Charcoal. Place your Sharpener on the ground, feed it Sandstone with a right-click in the middle of the Sharpener, and keep right-clicking your raw tools on it. After a few tries your tool heads will be sharpened, preventing you from using a file to do so, which costs time and resources.
  • If you use your Mixer for food it can go a long way if you frequently use Bread for food: Harvest your wheat (hint: use a Sense, it'll farm in a 3x3 pattern), grind it into Flour with a Mortar, right-click the Flour into the Mixer, and pour Water in with a Bucket (Iron or Wood made): right-clicking with an empty hand will get you Dough that you'll be able to craft into Bread or Baguettes, to be then cooked in a regular Furnace to make Sandwiches. You'll need 1 part Water to 3 parts flour so place your mixer near a well to spare yourself water trips. Or you can kill a lot of animals for eating, that works too!
  • A Dust Funnel may cost a bit of Steel but it may quickly become a valuable tool. Like the other contraptions it's GUI-less: you right-click dusts of any size (from blocks to 1/72th pile) and it will output through its bottom whatever dust size you set it to. To change the dust size (default is block size), just use a Monkey Wrench on it and you should see its internal funnel shrink in size until it returns to block size again. It may seem superfluous but once you'll have a steady ore processing facility, you'll enjoy not having to regroup all these dusts of various sizes.
  • The Reinforced Wooden Chest is a potential replacement for your good old double-block chest; it has a 36-slot capacity while only occupying one block. This is useful for when you start to build up your factory and all the machines and pipes start to be all around the place. Plus since you'll involuntarily hoard some materials (mainly Silver and Gold) while processing others (Copper for example has Gold as its by-product), you may soon realize that you can spare quite a lot of them in making these convenient chests. Note it is still flammable, use Metal Chests if you need one very close to your burning boxes.
  • An Advanced Crafting Table is all you ever dreamed of the Crafting Table: You can store components in its drawer, and they will automatically fill the blanks in the main crafting grids. You can pipe in fluids. You can keep your tools at hand. You can use blueprints to make your items automatically. And finally you can use automation to provide items and eject output. It's truly a blessing that comes in a lot of different materials, even Lead so you can build it very early in the game !
  • GregTech has its own variation of Hoppers and you're going to love them. Like all other variable metal-based contraptions the material you use puts a burden on the Hopper's capacity, but even the most basic one can be of a great help, like feeding a Crucible with a lot of dusts (the crucible can only have up to 16 dusts and any you throw beyond the 16th will be just floating inside in the form of dropped item), extracting metal from a Mold (it will be slow, because hopper can only extract cold metal), or automatically extracting ashes from a Burning Box. Being creative with a Hopper can be very rewarding, alleviating all the boring tasks and letting you focus on fun ones. Note that you can use a Screwdriver to tune a Hopper's stack size management.
  • A Bath (not to be confused with a Mixing Bowl Table) will help in handling dipping and soaking recipes, like Wood Pulp and Water into Paper or Wood Fluid Pipes and Creosote Oil into Sealed Wood Pipes. If you need to fill it with a portion of a Bucket , you can use a Measuring Pot. If you want to empty it, you can flush it with a Plunger, or just dig and replace, but remember that its contents will vanish.

So, at the end of the Forge Age, your current work process is now:

  • Mining Ores/Collect Sand&Gravel Ores
  • Crushing Ores with a hammer, or Sift Sand&Gravel ores with your Sifter
  • Washing results in Cauldron to get by-products
  • Turning Ores into ingots, plates, etc. with the Crucible

Better, isn't it? But a lot of labor work. Why don't we start letting machines do the hard work for us?

The Steam Age

Your first machine

Now that you're more familiar with the Burning Box heating principle we're going to mess with scary, scary steam power. Steam, at this point of the game, is the only way to power your first machines.

As an explanation, let's make ourselves a Rolling Mill. It's a basic machine that does not require a lot of expensive materials, and building it will help you understand the Steam mechanic in GregTech. Additionally, it will be of continuous use throughout your GT Career, because it'll allow you to focus on storing ingots as plates.

Make a lot of Bronze and craft a Bronze Boiler, a Funnel, some bronze small pipes (4 or 5 should be enough), a Bronze Steam Turbine, and a Bronze Rolling Mill.

Put the Boiler on top of the Burning Box like the Crucible. Place the Funnel on its side and put Water inside by right-clicking Water on it. Run pipes from its top hole to the back of the Steam Turbine. Put the Rolling Mill in front of the Turbine.

When lit, the Burning Box will heat up the Boiler, just like it did with the Crucible. Water will slowly reach its boiling point and during that time the barometer will rise slowly throughout the left white section up until the green zone; that's the moment when you'll start to have Steam. Steam will flow through pipes and will go inside the Steam Turbine. The Steam Turbine with then use this Steam to make its internal turbine roll, which will generate rotational energy, measured in GregTech as RU/t.

Rotational energy is then consumed by your brand new Rolling Mill that will turn it into internal energy (measured in GU, always with a 1:1 ratio regardless of energy input type). Put an ingot in the Mill and it will transform into a brand new Plate!

Naturally, being a machine, the Rolling Mill does not wear out. You just have to feed it energy (RU in this case) to make it work.

Energy Types and Efficiency

So, to sum up the previous tasks, you used heat (measured in HU/t) to power a Boiler (which converts HU/t to Steam/t) to power a Turbine (which converts Steam/t to RU/t) or an Engine (which converts Steam/t to KU/t) to power a Rolling Mill (which converts RU/t to internal GU/t) or a Squeezer (which converts KU/t into internal GU/t), and in the case of the Squeezer, transferred its content into a Coagulator (which uses time as a resource, measured in ticks (t), or seconds (1 sec = 20 ticks)).

There are several more energy types you should be aware of so here's a list of all of them:

  • HU/t is Heat energy. Made from Burning Boxes and Electric Heaters, you already know them for their use with a Crucible and a Burning Box, but HU is used by a lot of very useful machines.
  • KU/t is Kinetic energy. Made by a piston going back and forth, it's the energy required by a Crusher, a Sifter and a Compressor.
  • RU/t is Rotation energy. RU/t is very important because it's used by a lot of basic machines, so having several good RU/t producers is critical.
  • EU/t is Electric energy. Encountered later (during the Electric Age) you may already know EU/t as IC2 Energy system. Well you can just keep your general understanding of the concept and scrap anything specific because it changes quite a lot in GregTech.
  • MU/t is Magnetic energy. Generated by Electro- Magnets, it's a less-frequently used energy type but don't worry, you'll have to use it at some point too.
  • LU/t is Laser energy. Generated by Electric CO2 Lasers, will become vitally important later for Engraving Circuits.
  • QU/t is Quantum excitement energy. This is used by the Matter Replicator chain. End-game stuff, converted from Laser energy.

Another point to consider is your machines efficiency, starting by the Burning Box, which is at the very beginning of your chain. As you've read earlier, a Burning Box can be made of several materials, which can then themselves be of basic or dense state. Theses two parameters has a dramatic influence on the Burning Box's resulting theoretical output and efficiency.

For instance a Steel Burning Box is mildly powerful (32 HU/t), but it has an efficiency of 70%, while an Invar Burning Box, although less powerful (16 HU/t), has an outstanding 100% efficiency. The efficiency means your fuel will last more, and since you'll be burning a lot of fuel, having a perfect efficiency may sometimes be more important than raw heating power. Or course nothing prevents you from using a Burning Box at some point and then replace it for another one, under the same Boiler.

This efficiency rate is applied to almost all machines, so do not hesitate to do some math to understand what you need, and how you're going to produce the needed energy type and at which rate you're going to produce it. Again, I cannot stress enough the fact that you should read the tooltips again and again.

If you overlook this two major things may happen to your engines: they will be underpowered and may not even start, or they will overflow and even explode. You may restrict the flow of Steam your boiler will produce with pipes (look at their tooltip to see their maximum bandwidth) but limiting the flow can have another undesired effect: Steam pressure will build up in your Boiler. If your Boiler goes beyond the red zone, it will explode, and the blast radius isn't small. So be careful and think about what you're doing: Read the tooltips, adjust your math accordingly, and play it safe.

Making a machine is a long process; it would be a shame to waste all these efforts, wouldn't it?

Calcification

Calcification is a nasty consequence of boiling natural water. Water has impurities in it; therefore using it in a steam boiler will cause it to "calcify" and slowly reduce its efficiency by up to 50%.

You can safely check the calcification status of your boiler by using a Magnifying Glass, so craft one as soon as you can (you need just throw glass or sand in your crucible and cast a glass plate in the mold, then polish it with the file). You can make this check at any time, even when your boiler is running.

You can clean a Boiler by using a Chisel, but only if it has stopped running and its internal pressure has gone down to the white zone. Otherwise, you will be damaged and it may explode.

You can also clean a Boiler by removing it with a wrench and putting it back on its respective burning box, which only sacrifices wrench durability.

In both scenarios, cleaning the boiler will empty it of its contents, so remember to fill it up again with water afterwards.

To avoid calcification, you have to use Distilled Water instead of regular water. Putting water into a Dryer and heating it up with a burning box will output distilled water, and turbines and engines emit 80% of their used steam as distilled water.

Basic Machines

Now that you are more confident in getting your items parts from casting liquid metals and alloys into Molds, a word on this topic: You should craft almost all Molds as soon as possible. You're going to make more and more machines which will need more and more machines parts like Gears, Rods, Bolts, Plates, and so on. You'll be able to craft these with Ingots and Tools, but in doing so you'll lose a significant quantity of material in the process: For instance, crafting a Plate (1 unit) means hammering two Ingots (1 unit each) together and hammering the double Ingot to get the Plate. So you "paid" 2 units of material and 2 hammer crafting uses for 1 unit worth of Plate. If you've had a Plate mold you could have directly cast the material as a Plate, costing you only the unit worth of material you've put in your Crucible.

So think about what you want to make, and prepare your materials manufacturing list in advance: You can make batches of Plates, Rods, Gears to avoid having to craft them afterwards. Only exception are Screws, which will need a Lathe to make instead of casting material in a Mold.

Now your biggest concern will be what to make next. As always with GregTech the answer is simple: More machines to help us make even more machines !

Your basic machines will be ones that help you build more machines:

  • Automatic Hammer (KU-based, back side): Will crush ores you manually place in front of it. The material that the Automatic Hammer is made out of does not determine what ores it can crush.
  • Compressor (KU-based, left side): Can compress dense plates, which are used for making Dense or Strong burning boxes, Engines, and Boiler tanks, which are four times as powerful with the same efficiency (although if you use recipes meant for the tier below, it will use two times the energy and four times the energy/tick, but be twice as fast.) Make sure your machines and pipes can handle the boost in steam though, or they may/will explode!
  • Roll Bender (RU-based, back side): Mainly transforms Plates into Curved Plates and Rods into Springs. Worth having because you'll use your Rolling Bender quite often when you start to make pipes, batteries, and rotors, which require a lot of Curved Plates.
  • Lathe (RU-based, back side): Mainly transform Bolts into Screws. Useful because screws have no Mold of their own, and are a rip-off to craft from bolts, cost-wise. It also makes Sticks out of Planks quickly and lens out of glass.
  • Shredder (RU based, left or right side): Transform almost everything into dust, including machines, except ores (Crusher will handle them). Very useful as a recycler of old, obsolete machines/engines. Can also turn Wheat into Flour and Scraps into Dust. In other words, an automatic, higher-tiered Mortar.
  • Mixer (RU-based, bottom side): Replaces your table Mixer if you've got one but it's way more efficient since you can feed it water automatically (more on Liquids later)
  • Buzzsaw/Cutter (RU-based, back side): A little trickier to craft because of the Diamond Dust requirement, the Buzzsaw/Cutter is your Saw replacement, and can also turn gems into plates, so it's a direct dependency to the higher tier Crusher (Diamond Plates, but this recipe use more than 64 RU/t, so you will need advanced version of the machine). It's also very efficient in turning logs into planks.
  • Sluice (RU-based, back side): The Sluice is one of the most rewarding machines because it does the "Wash in Cauldron" step way better than you could ever do, even with redstone contraptions that fill a cauldron, and more reliably. You can put a Chest on top of a Sluice, feed it lots of Crushed Ores and go about your business while it safely washes them all. A Sluice need water from its top slot and produces Sluice Juice which you can collect in a Tank/Drum to later Centrifuge it or Dry+Magnet Separate it into other by-products.
  • Centrifuge (RU-based, bottom side): The Centrifuge is the last of the basic machines but also the most rewarding because it gets another shot at by-products. You can put a Chest on top of a Centrifuge, another one on its right, feed it with a ton of purified ores and go about your business while it safely takes care of your dusts. The Bronze variant will do almost all basic centrifuge recipes, but you may soon realize that a lot of recipes need a more powerful Centrifuge, so a Steel might get appealing then (but it will obviously require a more powerful Turbine), but the 64/t recipes are flatly dangerous to do without electric batteries.

Note: Unlike most mods other than Railcraft, GT Machines are always running (that is, until you've made some specific Covers for them to not do so), so if you're not using a machine, do not forget to unplug its pipe (use your wrench to "undo" the pipe that enters the machine) from the main Steam supply. You wouldn't want to waste Steam, would you ?

Once you've got the necessary requirements, it's time for your two bad boys: the Crusher and the Sifter. These two will replace the most tedious work you've done until now: crushing ores with your hammers (using a ton of them in the process, and a ton of time to use/make them) and sifting sand/gravel ores (which is just time and food consuming if you've built the Sifter). Both use KU so your Steel Engine setup from the HazMat path (if not better start now) will be of good use here.

Now your work process may still be not 100% automated, but all the hard work (making machine parts, grinding Ores into refined ores) should now be handled by machines, leaving you plenty of time to harvest more and more Coal/Charcoal to feed your never-ending Burning Boxes.

But, as usual now, some notes before diving in the next Age.

Multiblock Machines

What's more fun than building machines ? Building bigger machines, of course !

  • You'll build a Coke Oven quickly after you have build you first burning box, because it's the only way to get Charcoal out of Wood. It also produces Creosote Oil and can process Washed/Purified Lignite and Coal Ores. In terms of fuel power, the ranking is as follows:
    • Lignite (2)
    • Lignite Coke (4)
    • Coal/Charcoal (8)
    • Coal Coke (16). Note that Lignite Coke, although being half as powerful as Coal/Charcoal, can be found in much greater quantities, and the Coke Oven will produce more Creosote Oil out of it. It also lets you to process Oil Shale dusts to obtain Oil, which can further be used in a Distillation Tower.
  • A Distillation Tower will come later, and will be a milestone on its own, but there's nothing like having a giant refinery in your own backyard. Start looking for some oil underground!

Liquids and Gases

GregTech has many methods of storing fluids:

  • Ceramic Jugs and Measuring Pots. These are essentially buckets 2.0, able to be placed and able to store specific amounts of any liquid (below 2000K). They cannot place liquids, but can be drank from.
  • Barrels (or drums for higher tiers) are in many forms, each with different capacities and different storage capabilities. Machines will insert into and extract from them directly, and it also has the ability to be piped into. You can also insert and extract fluids manually with funnels and taps. If you want to extract into a pipe, you will have to use a Compact Electric Pump as a cover. Contrary to its name, it does not require any electricity.
  • Tanks are 3x3 expensive multiblock fluid tanks that can store vastly more fluids than drums can. They can automatically output fluids to pipes through the valve if gravity allows it to.

Compact Electric Pumps can run without energy (so, for free) so craft yourself a couple; you won't regret it, especially when you start juggling Drums to transform Water into Distilled Water or Sluice Juice, and then use these fluids for other tasks later. Put a cover on a pipe, adjust its flow direction with a Screwdriver if necessary and it will suck up the fluid from a Tank/Drum and inject it into the pipe.

You can also connect two machine's input/output sides to each other by using fluid pipes. For instance you can pipe the fluid output of a Sluice into the fluid input of a Centrifuge, similar to putting the Coagulator under the Squeezer. Likewise you can plug Item pipes in and out of machines to carry your items automatically from/into chests or other machines.

You can just put a Tank or Drum directly next to a machine's fluid input/output and the machine will import/export the fluid with it. Note: It may take a little bit of time for the machine to "detect" the Tank or Drum.

Machine Chains

One of the prevalent aspect of GT is production chains. Machines are your basic components that you utilize in several combinations, each one more and more complex, to easily and reliably achieve your goals in automation.

To inspire you, and to introduce some of the lesser known (but not so less useful) machines here are a Production Chain list you can refer to:

  • Machine Parts factory: Rolling Mill/Rolling Bender/Cutter/Lathe. You input Ingots and end up with Plates, Curved Plates, Springs, Rods, Screws, and so on. A good one to start with because you'll use it to make all the other chains, obviously.
  • Ore Processing Plant: Crusher/Sifter → Bath/Sluice → Centrifuge. You input ore blocks and end up with pure Dusts, a lot of by-products (and pretty Stone Dust for your walkways), and Sluice Juice. Take note of the requirements on some machines.
  • Bread Mill: Shredder → Mixer → Furnace. You input Wheat and get Bread Dough, that you can then cook to make Bread, and then Sandwiches !

- Bioethanol Rig: Shredder → Fermenter → Distillery. You input plants (Saplings, Logs, ...) and get Ethanol and Distilled Water. Ethanol can then go in a Liquid Burning Box as fuel, while the Distilled Water can replace regular Water in your Boiler.

- Saw Mill: Debarker → Buzzsaw → Lathe. You give it logs and it gives back Planks and Sticks at a ratio better than vanilla Minecraft's.

Of course in the beginning you will struggle to make a chain, having to switch machines between your few engines/turbines but slowly but surely, if you keep some clear production chain goals, you will see the results!

The Electric Age

Steam will still be your main power production for a while but at some point you'll start to feel the need to store all this energy, maybe to use later at a much higher rate, or just because you have a fuel excess you are already burning anyway. You may also be interested in other energy types like MU or LU, renewable energy, or just want higher-tier, more efficient and powerful machines.

For all these needs, at some point you'll have to step up to the Electric Age.

The Electric Age is not a completely different Age from the Steam Age. In the beginning you will use a lot of Steam to create your Electricity. So don't scrap away your set of pipes and engines; you're going to use these almost the same way, to power up batteries. These batteries will then power electric machines, which are much more efficient than the Steam ones.

Make a ton of stainless steel until you can make a Distillation Tower. Make a burning box to heat it, and put oil into it to distill it into useful fluids and gasses. You should definitely make a diesel engine to power your tungsten and titanium setups, since they are cheaper than turbine setups and don't use much fuel. Now, you will need to make tungsten to make a smelter. Before you process the tungsten, you will need to make Hydrochloric acid (HCl). This is made from mixing salt with sulfuric acid, an acid that is also useful for making batteries in the future. Tungsten is made from bathing 6 of one of the five different tungsten-bearing minerals in HCl to make tungstic acid. Putting 7 of these into a dryer will make 4 tungsten trioxide and will also yield distilled water. Mixing 4 tungsten trioxide with a lot of hydrogen will make 1 tungsten dust, so make an electrolyzer and put water into it. You can power it with a diesel engine or turbine into a dynamo, just without a battery box for now.

Make enough tungsten to make a tungsten crucible, and then make a smelter. Put limestone into this, and you will receive molten calcite. Put that into a drum for later. To make plastic, you will need titanium tetrachloride, which is made during titanium processing. Make a Burner Mixer, and something that outputs RU to power it. Add some chlorine to it by electrolyzing salt and water. Also add your molten calcite to it. Finally, add a source of carbon, such as coal coke dust (or carbon dust from electrolyzing charcoal), and rutile dust from processing ilmenite or rutile ore. When the Burner Mixer is on, light it with flint and tinder or a firestarter and it should start to look like a mixer.

Plastic can be made from Ethylene or Propylene, which is made from putting some of the Distillation Tower outputs into a Steam Cracker or Catalytic Cracker. Put either one of those gasses into a Mixer, as well as titanium tetrachloride, and you will make Plastic Pulp. Put this into a Low Heat Extruder to make a Plastic Sheet. Make a press and combine it with quartz dust to make a Circuit Plate, then make Circuit Wiring (Copper) and combine them in the Press to make a Circuit Plate (Copper).

You will need crystalline silicon. You need to smelt Certus Quartz, Quartzite, or Flint until it turns into Silicon Dioxide, then combine it with carbon or dark ashes in the Mixer to make Silicon Dust. Make a Chromium or better crucible. You can make a Meteoric Steel crucible if you have picked up enough meteorites (28) if you are afraid of melting your crucible. Find an platinum vein (Height 40-50) and mine enough Iridium Ore for 7 plates (or find some in chests). Be very careful not to overheat your iridium ore as the melting point for iridium is only 6 K below the melting point for the Chromium Crucible. Make an iridium crucible and then use it to make a Crystallisation Crucible. Use your silicon in it with Helium, Neon, or Argon (which you can get by smelting Monazite in the Smelter) and you get a Silicon Boule, which you can cut into crystalline plates for Circuit Parts which are used in the Press to finish the Circuit Board, which you then combine with molten Lead in a Bathing Pot to make a Circuit T1 (Basic). Or use better Parts and molten Tin for the better Circuit T2 (Good).

Your starting batteries are made of Lead and Sulfuric Acid. No canning machine required, just use the empty hull on the Tap from your acid Tank or Mixer. Then get some Battery Alloy from Lead and Antimony (following a 4:1 ratio), to assemble the correct number of cells into a battery. Later cells can hold more energy, like the Alkaline (Zinc-Manganese), Ni-Cad, or two types of Lithium cell.

Charging your batteries means creating electricity first, and for that you'll be needing a Steam Turbine and an Electric Dynamo. The Turbine produces RU and this energy is consumed by the Dynamo to make EU. Connect a Steam Turbine, a Dynamo, and a Battery Box together and put Lead-Acid Batteries in there. They will slowly charge up as the Turbine receives Steam. The materials involved dictate Steam requirements and the generated EU. As with the basic machines, be careful when you're crunching your numbers to decide what to build and read all the tooltips.

Advanced machines may explode by using the improper Voltage or Amperage...

Electricity

The two main aspects of electricity, Voltage and Amperage, are modeled in GT6. This means that instead of following a simple tier system, where you just have to make sure the numbers of two tooltips match (32EU/t in a wire, 32EU/t in a machine), GT allows you to feed a variable amount of electricity in your machines, so that you can slightly underpower or slightly overpower a machine, like you did with Steam albeit sometimes involuntarily because of Boiler calcification. Too large of a deviation will result in either an inactive machine or an exploding one. Always plan ahead.

Electric machines and wires, are defined by their ability to support Voltage and take in Amperage. The product of the two is power, expressed as where is Power, is Voltage, and is Amperage. As long as you're careful with these two values, everything should be fine.

Amperage is defined by the number of batteries you use at once in the battery charger. 1 battery means an Amperage of 1, 2 means an Amperage of 2, and so on. So you can tune your Amperage in real time if needed.

Voltage is more like the EU tier you are used to. Machines need to support the circuit Voltage to be able to let the Amperage do its work. Voltage is also your basic tier converter with IC2 setup, so you can use a Polarizer/Magnetizer combo with Tin Cable powered by a Battery Box, for instance.

When you have a solid electric charging setup, you should consider crafting Solar Panels, because renewable energy alleviates the need for fuel for your batteries, and mostly because it'll require a lot of thinking, crafting, and general GT machine usage to do so. IC2 nuclear energy can then be considered too, but of course be careful around radioactivity, and the blast radius.

Finally, you have electric tools, laser technology, the Robotic Age, and many other things not covered in here that will help you automate more and more steps in more and more complex work processes and production chains...

One final word: GT6 is in continuous developement so feel free to check in regularly to see everything new.

And, as always, good minin' and good craftin'!

Template:Navbox GregTech 6/ru

Other languages:
Advertisement